DRIVETRAIN
MOTOR SETS AND COMPONENTS TO COMPLETE MANUAL EQUIPPED INSTALLS INTO THE X8 CHASSIS
M + X83 (7M-GE, 7M-GTE) into Cressida
|
Oil Pan/Sump |
MX83 Cressida OEM sump is front
* MA70 Supra mid sump does not fit. * |
| Engine Mounts |
OEM |
| Gearbox |
#1 R154 with MA70 7M-GTE 5-Speed Bellhousing
#2 W58 with MA70 7M-GE 5-speed Bellhousing.
|
| Driveshaft |
OEM 2-Piece: Cressida Rear Half with Supra Front Half.
Custom order 1-Piece from Driveshaftshop.com or local Driveshaft supply. |
JZ + X83 (1JZ-GE, 1JZ-GTE, 1.5JZ-GTE, 2JZ-GE, 2JZ-GTE) into Cressida
|
Oil Pan/Sump |
#1 Front Sump w/turbo drain (dual) JZX81, JZS147 w/2JZGTE
#2 Front Sump with no drain hole (requires modification) JXE10 IS300, JZS147 w/2JZ-GE |
| Engine Mounts |
JZX81 Engine Mounts
Toyota Part # 12311-46020
Toyota Part # 12315-46020 |
| Gearbox |
#1 6MT Getrag V160/V161 (type 233) with JZ Bellhousing from JZA80 Supra.
#2 5MT Aisin R154 with JZ Bellhousing from JZA70 Supra.
#3 5MT Aisin AR5 (also know as MA5) from Pontiac Solstice, Saturn Sky, GMC Canyon, Chevrolet Colorado, Hummer H3. with JZ Bellhousing from JZA70 Supra. May require tailsection from a supra if the shifter location is not correct.
|
| Driveshaft |
JZA70 Front Half or Custom 1-Piece (The Driveshaft Shop makes them) |
UZ + X83 (1UZ-FE) into Cressida
|
Oil Pan/Sump |
LS400 (UCF10 / UCF20) front oilpan/sump. |
| Engine Mounts |
Require Custom Fab |
| Gearbox |
Box: 6MT Getrag V160/V161 (type 233), 5MT Aisin R154, or 5MT Aisin AR5 (also know as MA5)
May require tailsection from a supra if the shifter location is not correct.
Bellhousings and hardware available from:
The Castlemaine Rod Shop
- BH106 Bellhousing Kit $590 AUD
- SP10 Spacer (required for R154 only) $150 AUD
- FW44 Flywheel $410 AUD
Dellow Automotive
- Bellhousing and Flywheel for W and R transmissions
TTC Performance
- Adapter Plate for V160/161, R154 and W58 bellhousing $747.93 USD
Other Sources may be available on Lextreme.com
|
| Driveshaft |
Custom 1-Piece (The Driveshaft Shop can probably make one for you) |
S + X83 (3S-GE, 3S-GTE) into Cressida
|
Oil Pan/Sump |
OEM SXE10 Altezza oilpan works on the BEAMS 3S-GE only but would fit an MX83.
Non-SXE10 3S requires custom oilpan because of differences in BEAMS motor lower oilpan construction and pickup tube. |
| Engine Mounts |
Toyota made a 4S-FE powered SX81 Mark II, they might allow a BEAMS 3S-GE to drop into an MX83, if you can't get these mounts, custom mounts would be required. |
| Gearbox |
Altezza AZ6 6MT. Also, same gearbox installed in Nissan S15, 99-05 Miata and RX8.
|
| Driveshaft |
Custom |
GEARBOX GEARSET TABLES
M
| CODE |
1ST |
2ND |
3RD |
4TH |
5TH |
6TH |
ORIGIN |
| R154 |
3.250 |
1.955 |
1.310 |
1.000 |
0.753 |
----- |
1990-1992 Supra Turbo MA70 |
| AR5/MA5 |
3.753 |
2.26 |
1.37 |
1.000 |
0.729 |
----- |
2006+ Solstice Sky Colorado Canyon H3
Bolts to MA70 Supra Turbo Bellhousing for a 7M. |
JZ
| CODE |
1ST |
2ND |
3RD |
4TH |
5TH |
6TH |
ORIGIN |
| R154 |
3.250 |
1.955 |
1.310 |
1.000 |
0.753 |
----- |
1990-1992 Supra Turbo JZA70 (JDM) |
| V160 |
3.830 |
2.360 |
1.680 |
1.310 |
1.000 |
0.790 |
1993-1996 Supra Turbo |
| V161 |
3.724 |
2.246 |
1.541 |
1.205 |
1.000 |
0.818 |
1996-2002 Supra Turbo |
| AR5/MA5 |
3.753 |
2.26 |
1.37 |
1.000 |
0.729 |
----- |
2006+ Solstice Sky Colorado Canyon H3
Bolts to JZA70 (JDM) Bellhousing. |
UZ (USING R OR W SERIES ADAPTER/BELLHOUSING)
| CODE |
1ST |
2ND |
3RD |
4TH |
5TH |
6TH |
ORIGIN |
| R154 |
3.250 |
1.955 |
1.310 |
1.000 |
0.753 |
----- |
1990-1992 Supra Turbo MA70 |
| AR5/MA5 |
3.753 |
2.26 |
1.37 |
1.000 |
0.729 |
----- |
2006+ Solstice Sky Colorado Canyon H3
Bolts to MA70 Supra Turbo Bellhousing for a 7M. |
S
| CODE |
1ST |
2ND |
3RD |
4TH |
5TH |
6TH |
ORIGIN |
| AZ6 |
3.760 |
2.269 |
1.645 |
1.257 |
1.000 |
0.843 |
S15, Altezza, 99-05 Miata, RX8
Bolts to SXE10 Altezza Bellhousing for BEAMS 3S-GE. |
|
|
