|
SUSPENSION All manufacturer and brand names on this page are for reference purpose. This site is solely intended to aid enthusiasts, and is not affiliated with any of these companies. Please contact a Dealer, Distributor, or Importer if you wish to inquire about any product. Page last updated March 7, 2004. 935 Motorsports has made some of the products below available to the north american market. The MX83 application parts could likely be used with the JZX81 with no problems. K-Sport and Megan are working on Coilover damper systems for the MX83. And a new serious full damper suspension setup may soon be available from SerialNine  
Type-ST Dampers Application: JZX81 Front Spring: 12Kg Rear Spring: 10Kg Adjustment: Multi Stage Damping Kei Office Set Price: 268,000 Yen Included Swaybar End-link Relocation OUT OF PRODUCTION KEI OFFICE WEBSITE - BABELFISH TRANSLATION   Type-HA Dampers "Adjustment system pyro upper Aluminum rigid mount" Application: JZX81 Basic Set Spring Front: 10.0Kg Basic Set Spring Rear: 8.0Kg Ride Height Front: -40mm Ride Height Rear: -46mm Spring Rate Modification Range Front: 8-14Kg Spring Rate Modification Range Rear: 6-10Kg Height Adjustment Range Front: -79mm to -37mm Height Adjustment Range Rear: -86mm to -37mm Adjustment: 16-Stage Damping "Genuine tire & wheel installing failure. Ft wheel offset + 40 or less Correspondence. (6.5JJx16 suitable, at the time of standard height) In TEMS equipped car mount less kit When it combines, ? TEMS it is not the for car The genuine mount is needed" - translated from tein.co.jp website through babelfish This means you can't use TEMS, and that wheel offset must be calculated in order to clear. 16 x 6.5 +40mm offset "suitable" but using simple measurements, other sizes and offsets could be used. Kit Includes: Damper (4), Main Spring (4) Helper Spring (4), Lower spring seat (4) Seat lock (4), Spacer spring seat (4) Thrust washer (4), Bump rubber (4) Height measuring gage, Instruction manual Hook Spaner(2) Without adjustable pillow ball upper mounts Tein Part Number: DST00-K1SS2 Set Price: 220,000 Yen With "Pyro Attachment" Pillow ball upper mounts Part Number: DST00-K1SS1 Set Price: 259,000 Yen  S.TECH SPRINGS Chassis: JZX81 Model: Mark II - Chaser - Cresta Grade: GT twin turbo, Grande, Grande G S.Tech Conformity: Development Type 1 SET (SOFT) P/N: SKT00-S1B00 Price: Y26,400 Spring rate Front: 2.4-3.4Kg Height front: -35mm Spring rate Rear: 2.1-3.1Kg Ride height: -37mm Free length front: 330mm Free length rear: 368mm 1 SET (MEDIUM) P/N: SKT00-M1B00 Price: Y28,600 Spring Rate Front: 2.9-4.5Kg Ride height front: -35mm Spring rate Rear: 2.2-5.1Kg Ride height rear: -37mm Free length front: 305mm Free length rear: 362mm TEIN DEALER LISTING Many dealers may not be able to import TEIN Japan parts, Some specialized importers can do it though. Driftspeed.com, Autobacs, and Titan Motorsports have done it in the past.   JIC MAGIC Type SA-1 Dampers Front Spring: 12Kg Rear Spring: 8Kg Helper Spring: 80/80 Front Upper Pillow Ball: Camber Adjustable Adjustment: 5-Stage Damping JIC Set Price: 205,000Y ------------------------------------------------------------- Type SF-1 Dampers - Street/Beginner Grade Front Spring: 12Kg Rear Spring: 8Kg Helper Spring: 80/80 Front Upper Pillow Ball: Camber Adjustable JIC Set Price: 195,000Y JIC DEALERS TECHNO TOY TUNING     Techno Toy Tuning Carries a range of products for the MX83!  
Pyro Ball Upper Mount Camber adjustable upper strut mount with pillow ball attachment Cusco Pyro (Pillow) Ball Upper Mount Application: GX81 P/N: 173 410 A Application: JZX81 P/N: 173 411 A Strut tower bar P/N: ? Availability: Cusco Distributors  TRD JAPAN Spring Application Part Numbers: MARKII, CRESSIDA GX81 (For twin turbo, super charger model) MX83,JZX81 
PART#: 48130-JX800 - 34,000Y Listed at: 935 Motorsports INCLUDES: PART#: 48131-JX800 (FRONT SPRINGS) & P/N: 48231-JX800 (REAR SPRINGS) FRONT N/mm: 25.5 FRONT Kg/mm: 2.6 REAR N/mm: 28.4 REAR Kg/mm: 2.9 ------------------------ Shock Absorber Application Part Numbers: TEMS: (Front) P/N: 48511-GX884 - 26,000Y Remarks: 1421/363N (145/37kgf) 3-stage automatic adjustable rate cartridge type (Rear) P/N: 48530-GX884 - 22,000Y Remarks: 1225/363N (125/37kgf) 3-stage automatic adjustable rate Except TEMS model: (Front) P/N: 48511-GX883 - 23,000Y Remarks: 1470/392N (150/40kgf) 4-stages adjustable rate cartridge type (Rear) P/N: 48530-GX883 - 20,000Y Remarks: 1470/441N (150/45kgf) 4-stage adjustable rate Some Importers and Dealers can order TRD Japan parts for you. TRD 4-Way Adjustable Shocks for MX83 FRONT AND REAR SETS AVAILABLE Listed at: 935 Motorsports  WHITELINE WEBSITE Swaybars Toyota Cressida MX83 Application P/N: BTR30 Description: Rear Swaybar Diameter: 16mm Listed at: 935 Motorsports Strut Tower Bar Toyota Cressida MX83 Application P/N: ????? These MX83 Cressida parts should interchange with the JZX81 available at the WHITELINE ONLINE STORE - or - One of WHITELINE'S DEALERS  KING SPRINGS WEBSITE COIL SPRINGS Toyota Cressida MX83 Application PART NUMBERS: LOWERED REAR: KTRL-77 LOWERED FRONT: KTFL-76 STANDARD REAR: KTRS-77 STANDARD FRONT: KTFS-76 The MX83 Cressida Springs should interchange with the JZX81  DOBINSON'S WEBSITE COIL SPRINGS Toyota Cressida MX83 Application PART NUMBERS: LOWERED REAR: C59-190 (-1.2mm linear rate, 30 percent stiffer) LOWERED FRONT: C59-191 (-1.2mm linear rate, 30 percent stiffer) STANDARD REAR: C59-192 STANDARD FRONT: C59-193 Listed at: 935 Motorsports The MX83 Cressida Springs should interchange with the JZX81  GR2 Twin-Tube Struts with multi-stage damping Part Number: Front: 365076 Rear: 341111 Listed at: 935 Motorsports www.KYB.com - GR2 GAS SHOCKS  SANER PERFORMANCE FABRICATION 
REAR 25mm SWAYBAR for MX83 CONTACT SANER AT: HOME OFFICE 1449 SW FLOUNDER LANE PORT ST. LUCIE, FL 34953 PH / FAX 772-873-0238 SHOP 1753 S.W. BILTMORE STREET PORT ST. LUCIE, FL 34984 PH-772-873-9222 FAX- 772-873-9228 sanerperffab@cs.com or www.sanerperffab.com  KONI  Sport adjustable shocks (Yellow) Available at 935 Motorsports!  HARD PARTS DIABLO 
Rear Toe control rods Rear Camber rods Rear Traction rods. Made of 6061 Tubular aluminum (aircraft grade) with carbon fiber lined teflon injected heim joints and Steel brackets. AVAILABLE AT A1 RACING PRODUCTS Currently the DIABLO A-1 products for MX83 are unavailable *** DIY SECTION *** These are mods that have been mentioned in forums etc.. please use this info at your own risk!!! SWAYBARS: MX83 Stock Rear: smaller than JZX81 unit (10mm?) Nissan 280Z Rear swaybar - Larger 20-22mm has been modified to fit SHOCK ABSORBERS: MA70 (A7 Chassis) Supra Rear: similar to the JZX81, MX83 (X8 Platform) MA60 (A6 Chassis) Supra front: similar struts to MX83 design. www.advance-design.com may have very high end shock setups for earlier supras. They may make a set of MA70 rear and MA60 front shocks that could be used on an MX83. |